Part of Professional Retrofits Limited

CAMPERVAN ELECTRICAL SYSTEM DESIGN & INSTALLATION

We design, build and install Victron campervan electrical systems.

Tell us how you use your campervan and what you need to power. We design the complete electrical system around your requirements, supply the appropriate equipment, install it at our workshop, configure it and test the finished system.

THE STARTING POINT

Tell us how you use your van.

One electrical system, considered as a whole.

How you travel

Time away from hook-up

What you use

Appliances & daily demand

How you recharge

Solar, alternator & mains

What comes next

Provision for future changes

DESIGN → SUPPLY → INSTALL → CONFIGURE → TEST

Workshop installation · Higham on the Hill

WHAT WE DO

One specialist. Your complete electrical system.

01

System design

Requirements-led planning for the way you use your campervan.

02

Workshop installation

Complete electrical installation at our Higham on the Hill workshop.

03

Electrical upgrades

A considered approach to improving or rebuilding an existing system.

04

Configuration & commissioning

Victron configuration, monitoring setup and testing of the complete installation.

REQUIREMENTS FIRST

How will you use your campervan?

A van used mainly on campsites can need a very different electrical system from one spending several days off-grid. Cooking and heating with electricity also place different demands on battery and inverter capacity compared with using gas.

01

What do you want to power?

Induction cooking, a fridge/freezer, laptops, a TV, 230V sockets or electric hot water: we discuss the equipment you actually use, including your heating system.

02

How will you recharge?

We consider practical solar space, campsite hook-up and charging while driving alongside the time you want to spend off-grid.

03

What capacity is appropriate?

Your daily usage and charging opportunities guide battery capacity, inverter selection and monitoring. You do not need a product list before contacting us.

WORKSHOP INSTALLATION

Designed here. Installed here. Tested here.

We design the complete electrical system around your requirements and install it at our workshop. Once installed, the Victron equipment is configured and the complete system is tested as one integrated electrical installation.

Equipment specification and supply, cable manufacture, battery and charging integration, monitoring setup and commissioning are considered together.

Plan Your System

ONE COMPLETE INSTALLATION

01

Designed around your actual usage

02

Professionally installed and integrated

03

Victron equipment configured

04

Tested and commissioned

THE COMPLETE SYSTEM

A Victron component is only one part of the system

An Orion XS, MultiPlus or SmartSolar controller is only one component. Battery capacity, charging sources, cable sizing, circuit protection, distribution, configuration and the equipment you want to run all need to work together.

That is why we start with your requirements before selecting equipment. You tell us what the system needs to do; we determine an appropriate design.

VICTRON-BASED SYSTEMS

Why we build around Victron Energy

We use Victron Energy equipment because it allows charging, battery storage, solar, inverter power, distribution and monitoring to be designed as one integrated electrical system.

We select compatible equipment for your requirements and configure it as part of the complete installation. Not every campervan needs the same components.

01

Orion XS

A DC-DC charger that uses power available while driving to recharge the leisure battery with a charging profile matched to the battery.

02

SmartSolar MPPT

Manages the power from solar panels to recharge the leisure battery, adjusting to changing solar conditions.

03

MultiPlus

Combines an inverter and mains battery charger. A suitable 230V model powers appliances from the leisure battery and recharges it when mains power is connected.

04

SmartShunt

Tracks battery current and calculates an estimate of remaining charge, helping you understand what is going into and coming out of the battery.

05

Cerbo GX / GX Touch

Cerbo GX brings information from compatible equipment together. The optional GX Touch display gives you a local view of the system.

06

Lynx

A modular family for organised DC power distribution. Selecting the appropriate modules, such as the fused Lynx Distributor, provides distribution and circuit protection.

HOW IT WORKS

From your requirements to commissioning.

01

Discuss

Tell us how you use your van, what you need to power and how long you want to stay off-grid.

02

Design & specify

We design the complete system and select the appropriate Victron equipment and supporting components.

03

Quote & supply

We provide an individual quotation for the agreed specification and supply the equipment.

04

Install

We install and integrate the system at our Higham on the Hill workshop.

05

Configure

We set up charging, battery compatibility and monitoring for the agreed system.

06

Test & commission

We test the completed installation as an integrated system and commission it before completion.

EXISTING CAMPERVANS

Existing campervan electrics not doing what you need?

A leisure battery that runs down too quickly, inadequate charging or limited inverter capacity can mean the system no longer suits how you use the van.

We can assess, redesign, upgrade, rewire or rebuild an existing installation where appropriate. That may involve replacing an old lead-acid setup with lithium, adding solar, improving charging, reorganising poor wiring or modernising monitoring.

We review compatibility across the whole system, then configure and test the completed work.

WORKMANSHIP & SYSTEM DESIGN

The parts you don’t see matter too

A professional installation involves more than mounting components. Cable sizing, appropriate fusing and circuit protection, isolation, quality connections and organised distribution all form part of the design.

We also consider battery compatibility, charging configuration and how the components work together, followed by testing of the finished system.

A FEW PRACTICAL DETAILS

Before we start.

Where are vehicle installations carried out?

All vehicle installation work is carried out at our workshop in Higham on the Hill, near Nuneaton. We do not offer mobile installation.

Do you offer fixed-price packages?

Every system is designed and quoted individually according to the customer’s requirements.

Do I need to know which Victron products I need?

No. Tell us how you use your campervan, what you want to power and the charging sources available. We determine an appropriate system around your requirements.

THE WORKSHOP

Visit our installation workshop.

Where to find us

Unit 9
Station Road
Higham on the Hill
Nuneaton
CV13 6AG
United Kingdom

Workshop hours

Monday–Friday
09:00–17:00
Saturday–Sunday
Closed

Workshop installations

All vehicle installation work is workshop-based. We do not provide a mobile installation service.

Get directions

START WITH YOUR REQUIREMENTS

Let’s plan your system.

You do not need to know which Victron products to choose. Tell us how you use your van and what you want the electrical system to do. We can establish the detailed requirements after your initial enquiry.

Plan Your System